Smok RPM40 Pod Vape Kit

Introducing the Smok RPM40 Pod Vape Kit, a versatile hybrid cross between a pod system and box mod. It is quite small in size but houses a large 1500mAh internal battery. Whats more the RPM40 has adjustable power settings so you can choose the power you vape at. Capable of outputting 1-40W of power this kit covers has both MTL vapers and DL vapers covered. The new internal IQ-R chip is an improvement of previous iterations and allows the device to fire is lightening fast time. Just 0.001s. The pod mod is charged through the USB and boasts an impressive 2 hour charge cycle. As you would expect from a modern device this kit is packed full of safety features to ensure a safer vaping experience for the user. The screen on the RPM40 is a large 0.96" TFT screen that provides clear readouts and vaping details. you can even change the colour to suit your own personal preference. 

The Smok RPM40 comes with 2 different pods. You will receive the standard pod which utilises the new RPM40 coils but you will also receive an additional pod which is made to accommodate the highly regarded Smok Nord coils. Each pod is 2ml and the standard pod comes fitted with the new 0.4 Ohm coil made for DL (Direct To Lung) vaping. The RPM40 Nord pod will also come fitted with a coil and this is the 0.6 Ohm Nord DC coil.  Other coil options are available for the RPM Standard pod which accommodate for all vaping styles. You can choose from either the 0.4 Ohm Mesh Coil rated up to 25W, The 0.6 Ohm triple coil which is rated up to 25W, the RPM Quartz 1.2 Ohm coil which is used for MTL (Mouth To Lung) vaping and rated up to 12W, finally you can opt for the RPM SC 1.0 Ohm coil which is again for the MTL vapers and vapes best at 14W. With use of the alternative RPM Nord pod you can use all current available Smok Nord Coil. There is also a RPM RBA deck being released in due course allowing the more advanced users to wrap and wick their own coils. 

Please Note: The Smok RPM and Smok Nord Coils use different fittings meaning the RPM40 coils will only fit in the RPM Standard Pods and the Smok Nord Coils Will only Fit the RPM Nord Pods. 

Please note: The 3 free liquids supplied with this kit are High VG Liquids and should only be used with Sub-Ohm coils. MTL coils are available and if you opt for these coils then we would advise a 50/50 liquid or for an enhanced vaping experience we would suggest the use of Nic Salts. 

This year, all-in-one (AIO) Pod kits are proving to be extremely popular with mouth-to-lung and direct to lung vapers alike. This is no surprise when manufacturers such as Smok release kits capable of both vaping styles and offer a good selection of coils and even an RBA. The rise of Nic Salts also play a big part in the popularity of pod kits in thanks to the smooth flavour and quicker nicotine fix. Click here to view our ranges of Nic salts. 

Features:

• Portable and sleek, like a cuboid
• Powered by built-in 1500mah battery
• Wider mouthpiece, more air inhalation with huge vapour
• Adjustable output by press up/down button, massive vapour
• 0.96-inch TFT screen to show detailed vaping data
• Two RPM pods, compatible with RPM coils and Nord coils
• Side filling design
• Overheat protection
• 8s cut-off
• Short circuit protection
• Low voltage protection
• Size: 25 * 25 * 99mm
• Battery: 1500mAh built-in battery
• Output: 1W-40W
• Output Voltage: 0.5V-4.1V
• Input Voltage: 3.3V-4.2V
• Screen: 0.96-inch TFT display
• Charging Current: Max 0.88A
• Charging Voltage: 5V
• Standby Current: ＜140uA
• Resistance Range: 0.2ohm-2.5ohm
• Firing time: 0.001S
• Overcharge voltage: 4.3V
• Over-discharge voltage: 2.4V
• Capacity: 2.0ml (Standard Pod)/2.0ml (Nord Pod)

Contents:

• 1 x SMOK RPM40 Device(1500mah)
• 1 x SMOK RPM Standard Pod (RPM Mesh 0.4ohm Coil Pre-installed)
• 1 x SMOK RPM Nord Pod (Nord DC 0.6ohm Coil Pre-installed)
• 1 x USB Cable
• 1 x User Manual